3.7kW-15kW V9 Series High Performance Universal Speed AC Drive

Control characteristics

Control mode

Sensor-less control

Sensor control

Applicable motor type

Synchronous motor

Asynchronous motor

Synchronous motor

Asynchronous motor

Starting torque

● Asynchronous motor: 200% of rated torque at 0.25Hz

● Synchronous motor: 150% of rated torque at 1.5% of rated speed

200% of rated torque at 0 speed

Speed regulation range

1:200

1:5000

Steady speed precision

± 0.5%

± 0.02%

Maximum speed

VF control: 600Hz

Vector control: 600 Hz 

Note: Higher frequency products can be customized

600Hz

Note: Higher frequency products can be customized

Torque control

Y

Y

Torque control precision

±5%

±3%

Torque response time

<20ms

<10ms

Positioning control

N

Y

Positioning precision

N

±1 ;pulse

Product function

Key function

Torque limit, speed control, positioning control, motor auto tune, deep flux-weakening control, current limit control, over-voltage control, under-voltage control, motor speed tracing function, droop control, oscillation suppression, random carrier frequency, inertia auto-tune, etc.

Speed reference source

Modbus communication, Keypad, external digital input, analog ;AI1/AI2/AI3, high speed pulse input, simple PLC, PID, CAN, PROFIBUS DP, PROFINET, etc.

Dynamic brake

Brake unit action voltage: 650 ~ 750V.

The brake unit can be built-in for 110kW and below equipment

● 0.75~15kW: brake unit is built- in as standard.

● 18.5~110kW: brake unit is built- in as optional.

Communication

Built-in Modbus-RTU communication, the maximum distance up to 500 meters.

Keypad

LED Keypad and LCD Keypad are optional

the Keypad can be used as remote-control box via straight-through wired cable. 

Common DC bus

Support common DC bus directly

Independent air duct

All series product adopts independent duct design

Protection function

Power supply under-voltage, over-current protection, over-voltage protection, auto-tune fault, module protection, heat-sink over-temperature protection, drive overload protection, motor overload protection, peripheral protection, current abnormal detection, output short-circuit to ground protection, EEPROM abnormal detection, temperature sampling disconnection, encoder disconnection, analog input abnormal detection, motor over-temperature, communication fault, hardware overload protection, etc.

Efficiency

At rating condition:

● 0.75kW to 7.5kW: ≥93%

● 11kW to 45kW: ≥95%

● 55kW and ;higher ;power class: ≥98%

Environment

Operating site

● Install vertically in a well-ventilated electrical cabinet. Horizontal or other installation methods are not allowed.

● The cooling medium is air.

● Installed in an environment free from direct sunlight, dust, corrosive gases, flammable gases, no oil mist, no steam, no dripping.

Ambient temperature

● −10～+40℃

● Derating use when the temperature between 40 to 50℃, the rated output current is reduced by 1% for every 1 °C increasing.

Humidity

5～95%, no condensation is allowed.

Altitude

● 0～2000 meters

● Derating use when the altitude over 1000 meters, the rated output current is reduced by 1% for every 100-meter rising.

Vibration

● 3.5 m/s², 2～9Hz

● 10 m/s², 9～200Hz

● 15 m/s², 200～500Hz

Storage temperature

−40～+70℃.