Electrical Bus motor controller (6-8m,9-11m,9-18m)

Meet various vehicles applications By the end of June 2018, more than 200,000 units/sets have been used in various vehicle types: ■ Passenger vehicle (bus/commuter): small sea lion, Coster, 8.5m-12m passenger bus, 18m dual source trolleybus ■ Trucks: mini van and mini truck under 2.5 tons, 3.5-7.5 tons light trucks, 18-55 tons heavy trucks ■ Special-Purposed vehicles: sanitation truck, sprinkler truck, dust suppression truck, dock tractor, tunnel engineering tractor ■ Passenger car: A-class sedan, SUV

E5-PA series is a new constant pressure water supply inverter launched by V&T. E5-PA inverter, combined with the multi-pump control expansion card, can realize the multi-pump constant pressure water supply in turn with circulating; Built-in PID control--the current water pressure is detected by the pressure sensor, and according to the change of water pressure, 4 pumps are automatically switched to water supply at constant pressure under same power; At the same time, it can realize overpressure alarm, underpressure alarm, multi-time water supply at constant pressure, water supply at pressure constant with designated pressure and designated date, sleep control, change pump on time etc.

The VC20H series is a high-performance motion control type PLC with integrated 8×l00KHz high-speed counting function and up to 6 high-speed pulse outputs up to 200KHz. Up to 32K programme storage capacity.

Long-term Safe and Reliable Work From 2009 to 2012, more than 6,000 MCU controllers of electric vehicle were running in nearly 20 cities including Hangzhou, Qingdao, Nanjing, Suzhou, Nantong, Xiamen, Haikou, Urumqi and Tianjin. The new energy bus worked safely and reliably for 6-8 years. The running mileage of each electric vehicle reaches 500,000 -700,000 kilometers.

solar pump inverter The solar photovoltaic water pumping system, also known as the solar whater pump , has a basic principle of converting solar energy into electrical energy to drive various types of electric motors to operate water pumps for water lifting. solar pump inverter has many advantages such as being noiseless, fully automatic, and highly reliable. The photovoltaic power generation system operates fully automatically. Through the visual monitoring system, it can also improve the working environment of the operation and maintenance staff of water conservancy projects, enhance work efficiency, reduce the operation costs of water conservancy projects, and achieve unmanned operation and minimal on-site personnel. The advanced control system adjusts the rotational speed of the water pump according to the change in sunlight intensity, making the output power approach the maximum power of the solar cell array. When the sunlight is abundant, it ensures that the rotational speed of the water pump does not exceed the rated speed. When the sunlight is insufficient, it checks whether the set minimum operating frequency is met; otherwise, it automatically stops running. The water pump is driven by an electric motor to pump water from a deep well, which is then injected into a water storage tank/pool or directly connected to the irrigation system. Depending on the actual system requirements and installation conditions, different types of water pumps can be used for operation. The solar whater pump inverter (photovoltaic water pumping system) is mainly composed of three parts: solar cell modules, photovoltaic water-pumping inverters, and three-phase AC and DC water pumps. It effectively solves water-use problems caused by power shortages, deep groundwater levels, or large water lift heights. It is widely applied in various fields such as domestic water use, barren mountain treatment, ecological environment improvement, and crop irrigation.

Encoder Feedback Card

DTS800 series drive, driven by DTC control technology, is a multi-drive AC Inverter developed independently by V&T Company. With fast torque response performance and higher speed stability accuracy, DTC control can be realized with or without encoder. Even without encoder, the unique DTC control technology, with characteristics of large torque at low frequency and fast torque response, can meet application requirements in most cases.

Full Range Product ■ Covers the MCU six-in-one integrated controller, MCU five-in-one integrated controller, MCU / auxiliary drive four-in-one integrated controller, MCU / auxiliary drive three-in-one integrated controller, hybrid two-in-one integrated controller, auxiliary drive two-in-one integrated controller, motor + MCU integrated system, motor + gearbox + MCU integrated system; ■ Designed to meet customer needs for customized design; ■ Adapted for permanent magnet synchronous motor (PMSM), asynchronous motor, etc.; ■ Power range covers from 3kW to 355kW.

Meet various vehicles applications By the end of June 2018, more than 200,000 units/sets have been used in various vehicle types: ■ Passenger vehicle (bus/commuter): small sea lion, Coster, 8.5m-12m passenger bus, 18m dual source trolleybus ■ Trucks: mini van and mini truck under 2.5 tons, 3.5-7.5 tons light trucks, 18-55 tons heavy trucks ■ Special-Purposed vehicles: sanitation truck, sprinkler truck, dust suppression truck, dock tractor, tunnel engineering tractor ■ Passenger car: A-class sedan, SUV

E5-PA series is a new constant pressure water supply inverter launched by V&T. E5-PA inverter, combined with the multi-pump control expansion card, can realize the multi-pump constant pressure water supply in turn with circulating; Built-in PID control--the current water pressure is detected by the pressure sensor, and according to the change of water pressure, 4 pumps are automatically switched to water supply at constant pressure under same power; At the same time, it can realize overpressure alarm, underpressure alarm, multi-time water supply at constant pressure, water supply at pressure constant with designated pressure and designated date, sleep control, change pump on time etc.